Oxygen/Lambda Sensor Tester

Home > General Diagnostic > Engine Control >

PRO2™ Oxygen/Lambda Sensor Tester

PRO2™ Oxygen/Lambda Sensor Tester

List Price: $322.30
Our Price: $261.42
You Save $60.88!

Availability: Usually Ships in 3 to 5 Business Days
Product Code: BSLE67000

Description

The PRO2 Oxygen Sensor Tester is a unique hand-held unit that will quickly tell the technician if a sensor is suspect or good. There is no further testing needed. The "bed-of-nails" clips connect to the sensor leads, single wire to four, eliminating the need to remove or make direct contact with the sensor. The tester works with zirconium or titanium oxygen sensors - heated or unheated. The LCD display shows both numeric and graphic information. The mixture may be leaned or enriched to identify sensor or computer issues. The PRO2 is shipped complete with an instruction manual, all connections in a sturdy storage case.

Features

Drop Ship Only
Tests zirconium & titanium oxygen sensors.
Works on all oxygen sensors from single wire up to four wire.
For heated or unheated oxygen sensors.
Numeric Sensor Display shows Max. Voltage, Min. Voltage and Switching Frequency in Hertz.
Graphic Sensor Display shows a sensor input voltage waveform with the option to show the sensor switching in real time at intervals of 0.5, 1, 2, or 4 seconds eliminating the need for an oscilloscope.
Diagnostic Mode automatically checks the condition of the sensor returning a definitive result in 10 seconds. If a sensor is not good the PRO2™ will indicate a cause such as high voltage, low voltage or failed frequency. The PRO2™ will also indicate if the tester is incorrectly connected (reverse polarity), if it's an unrecognized type of sensor, a reversed input, short circuit input, open circuit input, etc..
Heater Resistance shows the Ohms resistance of the heater element of heated sensors.
Simulation for Zirconium Sensors forces voltage across the O2 sensor to simulate lean or rich to monitor the response of the engine control module.
General Purpose DC Voltmeter allows the PRO2™ to be used as a volmeter with a maximum voltage input measurement of ± 14.5V. The maximum input voltage that the instrument can withstand is ± 24V.
Up to 6 different languages selectable from menu.
16 character LCD display with adjustable lightness and darkness settings.
Uses AA batteries - low battery warning displays on screen.
No need to disconnect circuits, connection possible using unique probes.
All connectors included.

Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item:

General Diagnostic > Engine Control